medric medric
[닫기]
잠시만 기다려 주세요. 로딩중입니다.

Extraoral scanner와 intraoral scanner를 이용하여 제작된 zirconia crown의 2차원 변연 및 내면 적합도 비교: in vitro

Comparison of 2-dimensional marginal and internal fitness for the monolithic zirconia prosthesis using intraoral scanner and extraoral scanner: in vitro

대한치과기공학회지 2019년 41권 3호 p.187 ~ 193
이태희 ( Lee Tae-Hee ) - 고려대학교 대학원 보건과학과

이하빈 ( Lee Ha-Bin ) - 고려대학교 대학원 보건과학과
김지환 ( Kim Ji-Hwan ) - 고려대학교 대학원 보건과학과

Abstract


Purpose: The purpose of this study was to compare two-dimensional fitness of the monolithic zirconia prosthesis by using different type of scanner.

Methods: No. 26 abutment tooth of FDI system was selected for the study. Using the extraoral scanner and intraoral scanner, the abutment tooth was scanned 10 times and the scanned files were saved as STL files. CAD/CAM system was used to produce the monolithic zirconia prosthesis. marginal and internal gap of the monolithic zirconia prosthesis were measured by digital microscope(x160) and applied silicone replica technique was applied. t-test, a statistical software, was used to perform data analysis.

Results: Marginal gap mean±SD of the monolithic zirconia prosthesis was 33±7.5㎛ with extra oral scanner and 34.7±11.1㎛ with intraoral scanner. axial gap mean was 40.5±3.5㎛ with extra oral scanner and 44.6±11.6㎛ with intraoral scanner. occlusal gap mean was 110.1±25.4㎛ with extra oral scanner and 64±9.7㎛ with intraoral scanner.

Conclusion: In this study, fabricating zirconia prosthesis with different type of scanner was clinically applicable.

키워드

Intraoral scanner; Extraoral scanner; Marginal fit; Internal fit
원문 및 링크아웃 정보
 
등재저널 정보