medric medric
[닫기]
잠시만 기다려 주세요. 로딩중입니다.

다층 지르코니아 블록 종류와 소결방법에 따른 지르코니아 코핑의 파절강도와 색조 비교

Comparison of fracture strength and color of zirconia copings according to multi-layer zirconia blocks and sintering method

대한치과기공학회지 2019년 41권 3호 p.195 ~ 201
강재민 ( Kang Jae-Min ) - 부산가톨릭대학교 보건과학대학 치기공학과

김원영 ( Kim Won-young ) - 부산가톨릭대학교 보건과학대학 치기공학과
정인성 ( Chung In-Sung ) - 부산가톨릭대학교 보건과학대학 치기공학과

Abstract


Purpose: This study was investigated the effect of multilayer zirconia block type and sintering method on fracture strength, micro structure and color of zirconia copings.

Methods: Three kinds of multi-layered zirconia blocks were used to identify the effects of the kinds of multi-layered zirconia blocks and sintering methods on fracture strength and color reproducibility of zirconia copings. 60 Zirconia copings were fabricated and fracture strength, micro structure and color reproducibility were compared and evaluated.

Results: In all the blocks, the CS group, which refers to the general sintering method had higher fracture strength of zirconia copings than the MS group that refers to the microwave sintering method(MCS/MMS; 2,107.5N/1,930.4N, DCS/DMS; 917.0N/879.1N, UCS/UMS; 2,256.9/2,050.7N). In relation to CIE L*, a*, b* values of zirconia copings depending on the kinds of multi-layered zirconia blocks and sintering methods, the MS group using the microwave sintering method had lower brightness and chroma than the CS group using the general sintering method.

Conclusion: In all the blocks, the CS group(general sintering) had higher fracture strength of zirconia copings than the MS group(microwave sintering). In relation to CIE L*, a*, b* values of zirconia copings depending on the kinds of multi-layered zirconia blocks and sintering methods, the MS group using the microwave sintering method had lower brightness and chroma than the CS group using the general sintering method.

키워드

Multi-layered zirconia block; Fracture strength; Sintering metod; Color
원문 및 링크아웃 정보
 
등재저널 정보